Lens coatings transform plastic lenses into everyday masterpieces. They harden plastic lenses, making them dirt-resistant and easier to clean. But that's not the end of the story. Good anti-reflective coatings are equally essential. Try the all-in-one DuraVision Premium Coatings from ZEISS. They come in two quality categories: Platinum and Silver. DuraVision Platinum contains all the performance characteristics of DuraVision Silver and even goes one better with its hard coating! A special production process makes this possible.
Lenses have to withstand a lot of punishment. Daily stress and strain require durable, dirt-repellent lenses which are easy to clean. ZEISS premium lens coatings give you all of this in two quality categories: Silver and Platinum. For anyone who requires the optimum coating for their lenses.
DuraVision Silver is the most economical of the ZEISS DuraVision Premium coatings. Like DuraVision Platinum, DuraVision Silver is distinguished by its outstanding anti-reflective qualities. This gives you two advantages: reflection-free vision and a good appearance because the person you're talking to has a clear view of your eyes – it's as if the lenses weren't there at all.
A new anti-reflective coating is used with the DuraVision Premium Silver and Platinum coatings. You can see this from the blue residual reflection if you hold the lens at an angle against a white background. Every lens with an anti-reflective coating has this residual reflection which is green in many traditional lenses. For its Premium coatings, ZEISS uses a blue colour which, although it is more complex to produce, allows more light to reach the wearer's eyes – a definite benefit for better vision. Reflections are reduced on both the front and back surfaces of the lens by an additional 20%**.
A higher light transmission for even clearer vision.**
20 % fewer irritating reflections on the back ensures unimpaired vision.**
20 % fewer reflections on the front of the lens ensures a better appearance.**
** As compared with ZEISS glass lenses with standard anti-reflective coating with a green residual reflection.
The less-noticeable, blue residual reflection colour raises the lenses' light transmission and provides clearer vision. These lenses offer 20% lower light reflectance than the conventional anti-reflective coatings from ZEISS with green residual reflection like LotuTec.
The patented antistatic coating prevents the accumulation of static. Dirt and lint are not attracted to the lens surface, meaning that the lenses stay clean longer.
Thanks to their ultra-smooth CleanCoat, these lenses are specially easy to clean. Eyeglass lenses with a large contact angle repel water much more effectively.
DuraVision Platinum contains all the features of DuraVision Silver. But it goes one better when it comes to durability! With DuraVision Platinum, you give your lenses the best hard coating ZEISS has ever had.
What is the most important quality in a lens coating? 7 out of the 10 people we asked responded that scratch resistance and durability are most important. This isn't surprising because lenses must keep up with our modern lives and be sufficiently durable to rise to the challenges life poses, both at work and in our free time.
With DuraVision Platinum, ZEISS takes hard coating to the next level. A special manufacturing process makes our plastic lenses more durable than ever before. Internal measurements have shown that with DuraVision Platinum ZEISS can produce lenses that are three times harder than in the past.
ZEISS lenses with DuraVision Platinum coating are three times harder than conventionally coated plastic lenses from ZEISS and 35% harder than anti-reflective glass lenses from ZEISS.*
*ZEISS lenses with DuraVision® Platinum coating and 1.5 refractive index in comparison to ZEISS Single Vision Sph glass 1.5 with SUPER ET. Measured with the Bayer Test and conducted using the COLTS standard operating procedure and an abrasive recommended by COLTS.
The coating of every DuraVision Platinum lens consists of nine ultra-thin layers: first, the base glass receives a hard coating, followed by various anti-reflective coatings including an antistatic coating and finally by the CleanCoat layer. This topmost layer seals the lens and creates a perfectly smooth surface. Dirt and moisture bead off to enable a perfect, easy-to-clean lens.
However, the extreme hardness of DuraVision® Platinum can only be achieved by a special coating technology. The lenses are repeatedly bombarded by special ions during the production process. These transfer their kinetic energy to the lens and optimally compact the layers into one single coating. This ensures optimum adherence of the individual layers to each other. The result is a lens surface that is three times harder than the previous generation of ZEISS plastic lenses.* It is this very smooth and hard surface that makes the lenses more durable, dirt-resistant and easy to clean.
*ZEISS lenses with DuraVision® Platinum technology in 1.67 compared to LotuTec 1.67.
A microscopic section of a lens using conventional technology. The coatings are not tightly stacked.
A detailed view of a lens with DuraVision® Platinum technology as seen through a microscope. The coatings are tightly stacked.
The ZEISS Progressive Lens Portfolio offers four performance levels and seven technologies, some of which are all-time firsts anywhere in the world. Did you know that the reading distance between our eyes and a smartphone is much shorter than when we read a book or a newspaper?
ZEISS offers four levels of quality, ranging from traditional spherical up to individualised single vision lenses. Modern ZEISS technology can produce extraordinarily flat and lightweight lenses, even for high prescriptions.
It's always annoying to have dirty lenses. Cleaning your glasses should be as gentle, simple and effective as possible. That's why ZEISS offers such a wide range of lens cleaning solutions.
We're exposed to more blue light than ever before due to modern light sources such as LED lighting and the radiation emitted by display devices. Some people find that the blue light emitted by lights and displays makes them feel tired and uncomfortable.
Your ZEISS optician will be happy to configure the right lens coating for your new glasses after carefully explaining all the available options. Find a suitable optician here.